 |
 |
| (Minus 26mm Aggregates) |
READY TO USE ALL WEATHER COLDMIX ASPHALT
Ideal For Fixing Potholes And Other Road Maintenance |
 |
1. PREPARATION
Clean the repair area of loose debris and dust. A tack coat is not necessary.
(This product can be applied in wet conditions)
2. APPLICATION
Lightly manipulate this pack before dispensing the contents into the repair area.
Ensure that the “skin” (see 6 below) is properly mixed into fresh material.
Level out the product to the desired thickness, allowing about 50% of the depth for
compaction.
3. COVERAGE RATES
1 x 25 kg bag will yield approximately 0.5m² at 30mm thickness. Pre-fill Material can
be used for potholes deeper than 50mm, but ideally should be compacted in layers of
not more than 50mm. National Cold Asphalt “Wearing Course Material” should be
used to “finish” the top 20 to 30mm of the repair. This final layer can be compacted
together with the top layer of Pre-Fill Material, which creates a very good bond
between base and surface.
4. COMPACTION
Depending on the size of the repair, a hand stamper, rammer, plate compactor or
pedestrian roller can be used. |
|
|
|
| ALSO AVAILABLE IN 25KG BAGS |
- Permanent Repairs No Revisits
- Also Available In Bulk
- Immediate High Stability
- No Heating Necessary
- Equipment And Labour Savings |
 |
National Cold Asphalt specialises in road
repair projects that are community driven
with the emphasis on sustainability |
|
